Get in Toucharrow

CONTACT US

A Glance at the Entire Kit

 

LoRa-IoT-Development-Kit

 

 

 

 

DT01 – Voice over IP adapter

DTO1
Features:

 

Support multiple SIP / IAX2 entries

Easy configure SIP/IAX2/dial-plan in Web UI

Support WiFi AP, Client or Ad-Hoc(Mesh) mode

Support USB dongle for 3G/4G dial-up

Support USB flash for extending storage

 

HARDWARE SYSTEM:

 

Processor: 400 MHz, 24K MIPS

64MB RAM

16MB Flash

DC Input: 9 ~ 12v or 5V

 

INTERFACE:

 

1 x FXS port

2 x RJ45 ports

USB 2.0 Host port to connect 3G dongle or USB flash

 

WIFI SPEC:

 

IEEE 802.11b/g/n

Frequency Band: 2.4 ~ 2.462GHz

Chip Antenna or External antenna

 

PACKAGE INCLUDE:

 

DT01 VoIP appliance x 1

AU Power Adapter , 12v ,500ma x 1

 

LoRa Product – I

 

Features:

 

Compatible with 3.3v or 5v I/O Arduino Board.

915MHz/868 MHZ/433 MHZ frequency band

Low power consumption

External Antenna via I-Pex connector

 

Specifications:

 

168 dB maximum link budget.

+20 dBm – 100 mW constant RF output vs.

+14 dBm high efficiency PA.

Programmable bit rate up to 300 kbps.

High sensitivity: down to -148 dBm.

Bullet-proof front end: IIP3 = -12.5 dBm.

FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.

Low RX current of 10.3 mA, 200 nA register retention.

Fully integrated synthesizer with a resolution of 61 Hz.

127 dB Dynamic Range RSSI.

Automatic RF Sense and CAD with ultra-fast AFC.

Packet engine up to 256 bytes with CRC.

Built-in temperature sensor and low battery indicator.

 

LoRa GPS Shield

lorashield

Features:

 

LoRa™ Modem

Preamble detection

Built-in temperature sensor and low battery indicator

Excellent blocking immunity

Automatic RF Sense and CAD with ultra-fast AFC

GPS automatic switching between internal patch antenna and external active antenna

Support SDK command

Built-in LNA for better sensitivity

EASY™, advanced AGPS technology without external memory

AlwaysLocate™, an intelligent controller of periodic mode

GPS FLP mode, about 50% power consumption of normal mode

GPS support short circuit protection and antenna detection

 

Lora Spec:

 

168 dB maximum link budget.

+20 dBm – 100 mW constant RF output vs.

+14 dBm high efficiency PA.

Programmable bit rate up to 300 kbps.

High sensitivity: down to -148 dBm.

Bullet-proof front end: IIP3 = -12.5 dBm.

Excellent blocking immunity.

Low RX current of 10.3 mA, 200 nA register retention.

Fully integrated synthesizer with a resolution of 61 Hz.

FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.

Built-in bit synchronizer for clock recovery.

Preamble detection.

127 dB Dynamic Range RSSI.

Automatic RF Sense and CAD with ultra-fast AFC.

Packet engine up to 256 bytes with CRC.

Built-in temperature sensor and low battery indicator.

 

GPS Spec:

 

Power Acquisition:25mA,Power Tracking:20mA.

Compliant with GPS, SBAS.

Programmable bit rate up to 300 kbps.

Serial Interfaces UART: Adjustable 4800~115200 bps,Default: 9600bps.

Update rate:1Hz (Default), up to10Hz.

Protocols:NMEA 0183,PMTK.

Horizontal Position Accuracy:Autonomous <2.5 m CEP.

TTFF@-130dBm with EASY™:Cold Start <15s,Warm Start <5s,Hot start <1s;TTFF@-130dBm.

without EASY™:Cold Start <35s,Warm Start <30s,Hot Start <1s.

Timing Accuracy:1PPS out 10ns,Reacquisition Time <1s.

Velocity Accuracy Without aid <0.1m/s,Acceleration Accuracy Without aid 0.1m/s².

Sensitivity Acquisition -148dBm,Tracking -165dBm,Reacquisition -160dBm.

Dynamic Performance Altitude Max.18000m,Maximum Velocity Max.515m/s,Maximum Acceleration 4G.

L1 Band Receiver(1575.42MHz) Channel 22 (Tracking) /66 (Acquisition).

 

LG01 – Single channel LoRa Gateway

LGO1
Features:

 

Open Source OpenWrt system

Low power consumption

Firmware upgrade via Web

Software upgradable via network

Auto-Provisioning

Built-in web server

Managed by Web GUI, SSH via LAN or WiFi

Support WiFi AP, Client or Ad-Hoc(Mesh) mode

Internet connection via LAN, WiFi, 3G or 4G

Failsafe design provides robustly system

Arduino IDE compatible. Easy to program.

LoRa band available at 433/868/915/920 Mhz

Max range in LoRa : 5 ~ 10km

 

Applications:

 

Wireless Alarm and Security Systems

Home and Building Automation

Automated Meter Reading

Industrial Monitoring and Control

Long range Irrigation Systems

GPS tracker,etc

Specifications:

Linux Side:

 

Processor: 400MHz, 24K MIPS

Flash: 16MB ; RAM: 64MB

MCU/LoRa Side:

 

MCU: ATMega328P

Flash:32KB, RAM:2KB

LoRa Chip: SX2176/78

 

Package Info:

 

1 x LG01-S or LG01-P LoRa Gateway

1 x Glue Stick Antenna(868 MHZ, 433 MHZ or 915 MHZ depends on order)

1 x Power Adapter

1 x Screw Terminal (For Screw Version only)

Enviromental Package

 

Notice:

 

LG01 is a single channel gateway, it can be used in LoRaWAN network but not LoRaWAN full compatible.

IoT Product Kit